The manual isobaric dosing machine proposed by Cm3 Engineering can be produced with 2, 4 or 6 heads. It is suitable for the filling of sparkling and still drinks such as beer, mineral water, wine and drinks. It is possible to connect the machine to any carbonating system, which pressure is not greater than 5/6 bar.
The isobaric dosing machine can be electric or manual. The manual version exploits the gravity force for the filling process. With the electronic version, a pump is provided for the filling of still drinks.
Bottles can be made of glass or PET, up to 2 litres capacity. The dosing machine is designed according to the hygiene security requirements. In fact, all components and materials used in the production comply with legal requirements.
The basic conditions required for its use are that the water must be clean and filtered, and the equipment can only be used with a pressure reducer (regulator). The filling machine is equipped with a pump or solenoid valve and has a three-pole electrical socket (optional) with Single Phase, Neutral and Earth.
The machine can be supplied with a capping system for crown caps.
On request, the manual isobaric dosing machine can be provided with a rotary table and conveyor belt to transform the machine into a semi-automatic system.